Installing boot9strap (SSLoth-Browser)


Pour un support en Anglais, demander de l'aide sur le Discord Nintendo Homebrew.
Si vous appréciez ce guide, nous acceptons les Dons.

Technical Details (optional)

In order to exploit the Browser application, we need to bypass the browser version check, which is designed to disallow the use of the browser without updating to the latest system version.

A public proxy server is available, which, with the help of the SSLoth exploit, can bypass this check.

Once the bypass is active, an exploit webpage will be accessible which will do the rest of the job.

For technical details on the exploits that you will be using on this page, see here (SSLoth) and here (universal-otherapp).

Compatibility Notes

SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing the use of new-browserhax or old-browserhax (compatible with versions 11.4.0 through 11.13.0 in all regions), which can then be used in conjunction with universal-otherapp.

If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version.

Ce dont vous avez besoin

Section I - Préparatifs

In this section, you will copy the files needed to trigger both browserhax and universal-otherapp.

  1. Éteignez votre 3DS
  2. Insérez votre carte SD dans votre ordinateur
  3. Copy otherapp.bin to the root of your SD card and rename it to arm11code.bin
    • La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
    • If you do not see the .bin extension, do not add it to the end of the filename
  4. Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
  5. Créez un dossier à la racine de votre carte SD nommé boot9strap
  6. Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
  7. Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
  8. Réinsérez votre carte SD dans votre 3DS
  9. Allumez votre console

Section II - SSLoth

In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.

  1. Launch the System Settings application
  2. Navigate to Internet Settings -> Connection Settings
  3. Click on your network connection slot and navigate to Change Settings -> Next Page (right arrow) -> Proxy Settings
  4. Set “Proxy Settings” to “Yes”, then click Detailed Setup
  5. Set the Proxy Server to 192.9.234.11, and the Port to 8080
  6. Click OK, then click Save
  7. When prompted, click “Test” to perform the connection test
    • The test should succeed
  8. Click “OK” to continue
  9. Press “Back” twice, then “Close” to go back to the HOME Menu

Section III - Launching SafeB9SInstaller

In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.

  1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
    • If you are unable to open the camera, open the Internet Browser and manually type the URL instead (https://zoogie.github.io/web/nbhax/)
  2. Tap the QR code button and scan this QR code
  3. Tap the “PROCEED TO HAXX” button
  4. Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller

Section IV - Installing boot9strap

In this section, you will install custom firmware onto your device.

  1. Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
  2. Once it is complete, press (A) to reboot your device
  3. Votre console va redémarrer dans la configuration de Luma3DS
    • If your device shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
  4. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
    • If you get an error, just continue to the next page

At this point, your console will boot to Luma3DS by default.

  • Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  • On the next page, you will install useful homebrew applications to complete your setup.

Section V - Restoring default proxy

In this section, you will restore the Internet settings back to normal.

  1. Launch the System Settings application
  2. Navigate to Internet Settings -> Connection Settings
  3. Click on your network connection slot and navigate to Change Settings -> Next Page (right arrow) -> Proxy Settings
  4. Set “Proxy Settings” to “No”
  5. Click OK, then click Save
  6. When prompted, click “Test” to perform the connection test
    • The test should succeed
  7. Éteignez votre 3DS

Continuer vers Finalisation de l’installation