Installing boot9strap (HBL-USM)

Pour un support en Anglais, demander de l'aide sur le Discord Nintendo Homebrew.
Si vous appréciez ce guide, nous acceptons les Dons.

Technical Details (optional)

In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.

As we already have Homebrew access, we can use slotTool to do this.

Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.

For a more technical explanation, see here for information about the unSAFE_MODE exploit.

Compatibility Notes

If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join Nintendo Homebrew on Discord and ask, in English, for help.

Ce dont vous avez besoin

  • The latest release of SafeB9SInstaller (direct download)
  • The latest release of boot9strap (direct download)
  • The latest release of unSAFE_MODE
    • You may already have this from a prior section of the guide

Section I - Préparatifs

In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device’s SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.

  1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
    • If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
  2. Launch slotTool from the list of homebrew
    • If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
  3. Select the “INSTALL exploit to wifi slots 1,2,3 & shutdown” option
    • You will see some on-screen text and then your system will shut down
  4. Remove your SD card from your console and connect it to your computer
  5. Créez un dossier à la racine de votre carte SD nommé boot9strap
  6. Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
  7. Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
  8. Copy usm.bin from the unSAFE_MODE .zip to the root of your SD card
  9. Put your SD card back into your console

Section II - unSAFE_MODE

In this section, you will enter Safe Mode (a feature available on all 3DS family devices) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.

  1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
    • Keep holding the buttons until the device boots into Safe Mode (a “system update” menu)
    • If you’re unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join Nintendo Homebrew on Discord and ask, in English, for help.
  2. Appuyez sur “OK” pour accepter la mise à jour
    • Aucune mise à jour nécessaire. Ceci fait partie de l’exploit
  3. Appuyez sur « J’accepte » pour accepter les termes et conditions
  4. The update will eventually fail, with the error code 003-1099. Ne vous inquiétez pas, c’est normal
  5. Lorsque votre console vous demande “Paramétrer la connexion Internet de la console ?”, sélectionnez “Paramétrer”
  6. On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
  7. Si l’exploit a réussi, votre console devrait avoir démarré sur SafeB9SInstaller

Section III - Installation de boot9strap

In this section, you will install custom firmware onto your device.

  1. Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
    • If the top screen is blank, power off your device and re-do Section III
  2. Once it is complete, press (A) to reboot your device
  3. Votre console va redémarrer dans la configuration de Luma3DS
    • Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
    • For the purpose of this guide, these settings will be left on default settings
    • If your device shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
  4. Appuyez sur (Start) pour enregistrer les modifications et redémarrer

At this point, your console will boot to Luma3DS by default.

  • Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  • On the next page, you will install useful homebrew applications to complete your setup.

Section IV - Restoring WiFi Configuration Profiles

In this section, you will enter the Homebrew Launcher (this time using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.

  1. Lancez l’application Mode téléchargement
  2. Attendez jusqu’à ce que vous voyiez les deux boutons
    • Do not press either of the buttons
  3. Appuyez simultanément sur (L) + (Bas sur la croix directionnelle) + (Select) pour ouvrir le menu Rosalina
  4. Sélectionnez “Miscellaneous options”
  5. Sélectionnez “Switch the hb. title to the current app.”
  6. Appuyez sur (B) pour continuer
  7. Appuyez sur (B) pour revenir au menu principal de Rosalina
  8. Appuyez sur (B) pour quitter le menu Rosalina
  9. Appuyez sur (Home), puis fermez Mode téléchargement
  10. Relaunch the Download Play application
  11. Votre console devrait maintenant charger le Homebrew Launcher
  12. Launch slotTool from the list of homebrew
  13. Select “RESTORE original wifi slots 1,2,3”
  14. Your device will then reboot

Continuer vers Finalisation de l’installation