Problèmes et Dépannage


Pour un support en Anglais, demander de l'aide sur le Discord Nintendo Homebrew.
Si vous appréciez ce guide, nous acceptons les Dons.

Cette page offre des conseils de dépannage pour les problèmes rencontrés couramment. Si les conseils donnés sur cette page ne vous permettent pas de résoudre votre problème, nous vous invitons à rejoindre notre serveur Discord Nintendo Homebrew et à y décrire votre problème et ce que vous avez déjà essayé.

Table des matières

Utilisé sur plusieurs pages :

Pages du guide :

Problèmes après l’installation :

Problèmes avec SafeB9SInstaller

Before opening SafeB9SInstaller

Failed to open SafeB9SInstaller.bin

Le fichier SafeB9SInstaller.bin est absent ou mal placé. Téléchargez la dernière version de SafeB9SInstaller, extrayez-le et placez SafeB9SInstaller.bin à la racine de votre carte SD. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.

SigHaxed FIRM was not installed! Check lower screen for more info.

MicroSD Card - init failed

Your SD card is most likely acting weird. Try reformatting your SD card (Windows, macOS, Linux). If this doesn’t work, try another SD card.

SigHaxed FIRM - File not found

Les fichiers boot9strap.firm et boot9strap.firm.sha sont absents du dossier boot9strap, ou le dossier boot9strap est mal nommé. Téléchargez la dernière version de boot9strap, et placez boot9strap.firm et boot9strap.firm.sha dans le dossier boot9strap.

SigHaxed FIRM - invalid FIRM

Il y a un problème avec vos fichiers boot9strap.firm et boot9strap.firm.sha. Re-téléchargez la dernière version de boot9strap, et placez boot9strap.firm et boot9strap.firm.sha dans le dossier boot9strap.

Secret Sector - File not found

Le fichier secret_sector.bin est absent du boot9strap, ou le dossier boot9strap est mal nommé. Téléchargez secret_sector.bin à l’aide d’un client torrent et placez-le dans le dossier “boot9strap”.

Autre chose

Rejoignez Nintendo Homebrew sur Discord pour obtenir de l’aide et décrivez le message que vous voyez.

Installation de boot9strap (Soundhax)

Écran rouge/violet/rose et blanc après avoir exécuté Soundhax

If your console is on system version 9.4.0, 9.5.0, or 9.6.0, you may be encountering a bug with an old version of universal-otherapp. Download the latest version from here.

If your console is not on those firmwares, it likely indicates that you already have custom firmware. Vous devriez vérifier la présence d’un CFW.

"Le logiciel a été arrêté car une erreur est survenue. La console va redémarrer." (boîte de message blanche)

Il y a un problème avec votre fichier otherapp.bin (il est absent, mal placé ou corrompu). Téléchargez la dernière version de universal-otherapp et placez le fichier à la racine de votre carte SD.

"Lecture impossible."

You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, your course of action will determine on what version your 3DS is currently on. Rejoignez Nintendo Homebrew sur Discord pour obtenir de l’aide.

Failed to mount the SD card!

Sauvegardez vos données et reformatez votre carte SD en FAT32 avec l’outil recommandé en fonction de votre système d’exploitation (Windows, macOS, Linux). MiniTool Partition Wizard et l’outil de formatage d’HP (HPUSBDisk) sont connus pour causer des problèmes avec les cartes SD des 3DS.

Si cela échoue, essayez d’utiliser une autre carte SD.

Installing boot9strap (MSET9)

Python 3 is not installed

Python is not installed on the computer you are using. Download it from the Python website, double-click the installer, and follow the prompts to install Python. Once Python is installed, try again.

Error 01: Couldn't find Nintendo 3DS folder

You are not running MSET9 from the root of the SD card, or the SD card is missing the Nintendo 3DS folder.

Remember, your SD card should look like this:

MSET9 root layout

If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux, macOS), then start again from the beginning of Section I.

Error 02: Your SD is write protected

Write-protection is enabled on this SD card. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.

Error 03: Don't change console version

You inputted a different number between different runs of MSET9 (for example, you initially selected option 1 for “Old 3DS, 11.8 - 11.17” and then later selected option 2 for “New 3DS, 11.8 - 11.17”).

If this happened when trying to uninstall MSET9, the script has automatically removed MSET9 for you and you can continue to the next page. Otherwise, start again from the beginning of Section I.

Error 04: No HOME Menu Extdata.

Your SD card is not formatted properly.

Copy everything off the SD Card to your PC, re-format it (Windows, Linux, macOS), copy everything back, then start again from the beginning of Section I.

Error 05: No Mii Maker Data!

Mii Maker data was not found on the SD card. Start again from the beginning of Section I.

Error 06: You need at least 16MB free

Your SD card does not have enough space to trigger MSET9. Free up some space and try again.

At the end of this guide, you will need at least 1.3GB to make a NAND backup, so it’s best to free up at least that much.

Error 07: You don't have 1 ID0, you have (#)!

You have multiple ID0 folders. To determine the correct folder, follow these instructions:

  1. Renommez le dossier Nintendo 3DS en BACKUP_Nintendo 3DS
  2. Réinsérez votre carte SD dans votre console
  3. Power on your console
  4. Wait for the console to generate the SD card data
    • Vos applications auront disparu. Ceci est normal et sera résolu plus tard
  5. Éteignez votre console
  6. Insérez votre carte SD dans votre ordinateur
  7. Naviguez vers le dossier Nintendo 3DS de votre carte SD
  8. Write down the first few characters of the folder you see
    • This is your true ID0, which we will keep in the real Nintendo 3DS folder
  9. Delete the ID0 from the current Nintendo 3DS folder
  10. Move the true ID0 folder from the BACKUP_Nintendo 3DS folder to the Nintendo 3DS folder
  11. If it exists, move the Private folder from the BACKUP_Nintendo 3DS folder to the Nintendo 3DS folder

Once you’ve done this, continue from Section I Step 7.

Error 08: One or more files are missing or malformed!

One or more files that MSET9 needs to run is missing or corrupted. Re-download the MSET9 Release .zip and extract it to the root of your SD card, replacing all existing files, then try again.

Error 10: Database(s) malformed or missing!

This happens when no valid title database is present, usually because you never installed any titles from eShop on this SD card.

  1. If you haven’t already, press Enter to close the MSET9 script
  2. Insert the SD card into your console
  3. Power on your console
  4. Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset (visual instructions)
  5. Éteignez votre console
  6. Insert the SD card into your computer
  7. Return to Section I Step 7
Error 12: You don't have 1 ID1, you have (#)!

This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.

You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:

Backup ID1

Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:

Properties prompt

Which to delete

Your SD card should now look something like this:

Just enough ID1s

Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.

Red screen after reinserting SD card (Section II Step 11)

You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.

Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux, macOS (this will wipe your SD card data)

System Settings loading infinitely after reinserting the SD card

You most likely did something different from the MSET9 instructions, or selected the wrong model or version.

  1. Close the script window
  2. Execute the mset9.py script on the root of the SD card
    • Windows: Double-click mset9.bat
    • Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
    • You should see a window that says “MSET9 … SETUP by zoogie”
  3. Type the number corresponding to your console model and version, then press Enter
  4. Type 3, then press Enter
  5. Once the window says “Successfully removed MSET9!”, reinsert the SD card into your console
  6. Power on your console
  7. Return to Section II Step 1

If you continue to have this issue and are sure that you did everything correctly, it’s possible that there’s something wrong with your Mii Maker extdata. Follow these instructions to reset it:

  1. Close the script window
  2. Run the MSET9 script
    • Windows: Double-click mset9.bat
    • Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
    • You should see a window that says “MSET9 … SETUP by zoogie”
  3. Type the number corresponding to your console model and version, then press Enter
  4. Type 3, then press Enter to remove MSET9
  5. If possible, use a new SD card; otherwise, backup and reformat your existing SD card as FAT32 (Windows, Linux, macOS)
  6. Insert the formatted, blank SD card into your console
  7. Return to Section I Step 1

After finishing the MSET9 page, you should switch back to your old SD card before continuing to Finalizing Setup.

An exception occured after triggering MSET9

Cela indique que vous avez probablement déjà un custom firmware. Vous devriez vérifier la présence d’un CFW.

Installing boot9strap (super-skaterhax)

"Une erreur est survenue. Veuillez sauvegarder les données de tout logiciel en cours d'utilisation et redémarrer la console."

La date n’est pas correctement configurée. Pour la configurer correctement, suivez ces étapes :

  1. Ouvrez les Paramètres de la console depuis le Menu HOME.
  2. Allez dans Autres paramètres.
  3. Puis Date et heure.
  4. Appuyez sur Date.
  5. Appuyez sur les flèches Haut/Bas pour définir le jour, le mois et l’année.
  6. Appuyez sur OK pour confirmer.

If the problem persists:

  • Ensure that arm11code.bin, browserhax_hblauncher_ropbin_payload.bin, and boot.3dsx are on the root of the SD card (not inside of any folder)
  • Ensure that you selected the correct payload for your region AND system version
  • Ensure that your region settings look like this
  • Try resetting your browser data:
    1. Lancez le Navigateur Internet, puis accédez aux paramètres du navigateur
    2. Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
    3. Retentez l’exploit
  • Try changing the system language to something other than the current language
"Une erreur est survenue. Maintenez le bouton POWER enfoncé pour éteindre la console..." (écran noir avec texte)

Le fichier arm11code.bin est absent ou mal placé. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).

An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!

Cela indique que vous avez probablement déjà un custom firmware. Vous devriez vérifier la présence d’un CFW.

Installation de boot9strap (SSLoth-Browser)

Écran rouge/violet/rose et blanc après avoir exécuté Browserhax

Cela indique que vous avez probablement déjà un custom firmware. Vous devriez vérifier la présence d’un CFW.

"Une erreur est survenue. Maintenez le bouton POWER enfoncé pour éteindre la console..." (écran noir avec texte)

Le fichier arm11code.bin est absent ou mal placé. Téléchargez la dernière version de universal-otherapp, placez otherapp.bin à la racine de votre carte SD et renommez-le en arm11code.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.

"Le logiciel a été arrêté car une erreur est survenue. La console va redémarrer." (boîte de message blanche)

Il y a peut-être un problème avec votre fichier arm11code.bin. Téléchargez la dernière version de universal-otherapp, placez otherapp.bin à la racine de votre carte SD et renommez-le en arm11code.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.

You can also try resetting your browser save data:

  1. Lancez le Navigateur Internet, puis accédez aux paramètres du navigateur
  2. Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
  3. Retentez l’exploit
L'ouverture du QR code ou de l'URL de browserhax plante

Les exploits basés sur le Navigateur Internet (comme celui-ci) sont souvent instables et plantent fréquemment, mais ils peuvent parfois être corrigés en effectuant les étapes suivantes.

  1. Lancez le Navigateur Internet, puis accédez aux paramètres du navigateur
  2. Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
  3. Retentez l’exploit
Demande de mise à jour de la console lors de l'ouverture du Navigateur Internet

Le proxy SSLoth a été mal configuré. Refaites la section SSLoth de la page.

Erreur 032-0420 lors de l'ouverture du Navigateur Internet

Suivez ces étapes dans l’ordre :

  1. Launch System Settings on your console
  2. Naviguez vers Paramètres Internet -> Paramètres de connexion
  3. Cliquez sur votre emplacement de connexion réseau et allez dans Modifier -> Page suivante (flèche à droite) -> `Serveur proxy”
  4. Réglez “Serveur proxy” sur “Non”
  5. Cliquez sur OK, puis sur Sauvegarder
  6. Lorsque vous y êtes invité, cliquez sur “Tester” pour effectuer le test de connexion
    • Le test devrait réussir
  7. Cliquez sur “OK” pour continuer
  8. Appuyez deux fois sur « Retour », puis « Fermer » pour revenir au Menu HOME
  9. Ouvrez le Navigateur Internet une fois
  10. Si vous êtes invité à mettre à jour votre console, appuyez sur OK
    • Cela ne mettra pas à jour la console
  11. Recommencez à partir de la Section II
Plantage sur "Doing agbhax..."

Il y a peut-être un problème avec votre fichier arm11code.bin. Re-téléchargez la dernière version de universal-otherapp, placez le fichier à la racine de votre carte SD et renommez-le en arm11code.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.

"PrepareArm9ForTwl returned error c8804631!"

Rejoignez Nintendo Homebrew sur Discord pour obtenir de l’aide.

Failed to mount the SD card!

Sauvegardez vos données et reformatez votre carte SD en FAT32 avec l’outil recommandé en fonction de votre système d’exploitation (Windows, macOS, Linux). MiniTool Partition Wizard et l’outil de formatage d’HP (HPUSBDisk) sont connus pour causer des problèmes avec les cartes SD des 3DS.

Si cela échoue, essayez d’utiliser une autre carte SD.

Finalisation de l’installation

Unable to update console

Les étapes ci-dessous peuvent être tentées dans n’importe quel ordre, mais sont répertoriées de la plus facile à la plus difficile à exécuter.

  1. Réglez le paramètre “Obtention automatique d’un DNS” sur “Oui”
  2. Rapprochez-vous de votre point d’accès Wi-Fi
  3. Effectuez une mise à jour depuis le mode sans échec (Safe Mode) en éteignant la console puis en maintenant les boutons (L) + (R) + (Haut sur la croix directionnelle) + (A) pendant le démarrage de la console et suivez les instructions à l’écran
  4. Supprimez votre connexion Wi-Fi, puis connectez-vous à nouveau à votre point d’accès Wi-Fi
  5. Redémarrez votre point d’accès Wi-Fi
  6. Connectez-vous à un point d’accès Wi-Fi différent, comme un point d’accès mobile
  7. Les serveurs de Nintendo sont peut-être en panne ; Réessayez plus tard
  8. Si vous recevez toujours un message d’erreur, suivez CTRTransfer, puis réessayez
  9. Pour plus d’assistance (en anglais), rejoignez Nintendo Homebrew sur Discord
Error #22: finalize.romfs is invalid

The file finalize.romfs is corrupt or unreadable. Re-download it and copy it to the root of the SD card, replacing any existing copy, then try again.

Information #23: finalize.romfs in wrong location

The file finalize.romfs was placed in the wrong location instead of root of SD. The script will attempt to resolve this, but requires your permission to do so. Press (A) on the next few prompts to continue.

Error #24: SD is write-protected

Ensure that your SD card is not locked. If the SD card is not locked and you continue to get this error, join Nintendo Homebrew on Discord for assistance.

Error #02: Missing essential.exefs

You said ‘No’ to the “Make essential files backup?” prompt in GodMode9. Power off your console, power it on while holding (Start) to re-enter GodMode9, say ‘Yes’ to the prompt, then try again.

Error #04: No space

You need at least 1.3GB of free space to perform the NAND backup, which is a part of the script. Si vous n’avez pas assez d’espace, suivez ces étapes :

  1. Éteignez votre console
  2. Insérez votre carte SD dans votre ordinateur
  3. Copiez le dossier Nintendo 3DS depuis la racine de votre carte SD vers votre ordinateur
  4. Supprimez le dossier Nintendo 3DS de votre carte SD
  5. Réinsérez votre carte SD dans votre console
  6. Press and hold (Start), and while holding (Start), power on your console. Ceci lancera GodMode9
  7. Press the (Home) button
  8. Sélectionnez “Scripts”
  9. Select “finalize”
  10. Press (A) to create a NAND backup
    • This may take around fifteen minutes
  11. Press (A) again
    • The console should automatically power off
  12. Insérez votre carte SD dans votre ordinateur
  13. Copy the files in /gm9/backups/ on your SD to a safe location on your computer
  14. Delete the <date>_<serialnumber>_sysnand_##.bin and <date>_<serialnumber>_sysnand_##.bin.sha files from the SD card
  15. Copiez le dossier Nintendo 3DS de votre ordinateur vers la racine de votre carte SD
  16. Supprimez le dossier Nintendo 3DS de votre ordinateur

Now that you have your NAND backup in a safe place:

  1. Réinsérez votre carte SD dans votre console
  2. Press and hold (Start), and while holding (Start), power on your console. Ceci lancera GodMode9
  3. Press the (Home) button
  4. Sélectionnez “Scripts”
  5. Select “finalize”
  6. Continue the script as normal
    • The NAND backup will be automatically skipped
Information #05: No title database

Press (A) to import a title database, unlock SysNAND writing by entering the buttons on-screen, then continue the script as normal.

Error #06 or "Error: Could not open directory" when attempting a NAND backup

Assurez-vous d’avoir au moins 1,3 Go d’espace disponible sur votre carte SD. Si vous n’avez pas assez d’espace, suivez ces étapes :

  1. Éteignez votre console
  2. Insérez votre carte SD dans votre ordinateur
  3. Copiez le dossier Nintendo 3DS depuis la racine de votre carte SD vers votre ordinateur
  4. Supprimez le dossier Nintendo 3DS de votre carte SD
  5. Réinsérez votre carte SD dans votre console
  6. Press and hold (Start), and while holding (Start), power on your console. Ceci lancera GodMode9
  7. Effectuer une sauvegarde de la NAND
  8. Copiez les fichiers du dossier gm9/out de votre carte SD vers un endroit sûr sur votre ordinateur
  9. Supprimez les fichiers <date>_<serialnumber>_sysnand_##.bin et <date>_<serialnumber>_sysnand_##.bin.sha de votre carte SD, en gardant essential.exefs dans /gm9/out/
  10. Copiez le dossier Nintendo 3DS de votre ordinateur vers la racine de votre carte SD
  11. Supprimez le dossier Nintendo 3DS de votre ordinateur

Si vous avez assez d’espace sur votre carte SD, votre carte SD pourrait être corrompue ou défectueuse. Vérifiez si votre carte SD est corrompue ou défectueuse en suivant le guide correspondant au système d’exploitation de votre ordinateur : Windows, Linux, macOS.

Error #12: Copy (file).db fail

Ensure that your SD card is not locked. If the SD card is not locked and you continue to get this error, join Nintendo Homebrew on Discord for assistance.

Information #17: Duplicate NAND backup

The script has detected that the Nintendo 3DS folder is missing AND that you have already made a NAND backup before. If you intend to install homebrew applications, you should do the following:

  1. Press (B) to cancel making another NAND backup
  2. Hold (R) and press (Start) at the same time to power off your console
  3. Copy the contents of /gm9/backups/ to a safe location on your computer
  4. Delete /gm9/backups/ from your SD card
  5. If you moved your Nintendo 3DS folder off of your SD card to get to this point, copy it back to your SD card
    • If you do not have a Nintendo 3DS folder, boot into the HOME Menu at least once with the SD card inserted to automatically generate it
  6. Press and hold (Start), and while holding (Start), power on your console. Ceci lancera GodMode9
  7. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu)
  8. Sélectionnez “Scripts”
  9. Select “finalize”
  10. Follow the prompts in the script, answering any questions that you are asked
Error #18: MSET9 detected

You didn’t remove MSET9 when prompted to. Follow Section IV - Removing MSET9 from the Windows/macOS/Linux guide or the Android/ChromeOS guide, then re-run the script.


Boot issues on consoles with custom firmware

The steps detailed here generally assume that your console has a modern custom firmware setup (boot9strap + Luma3DS 8.0 or greater). Si votre console exécute une ancienne configuration homebrew (par exemple, quelque chose basé sur arm9loaderhax ou menuhax), vous devez mettre à jour votre configuration avant d’essayer ces instructions.

LEDs d’alimentation/de notification

My console powers off when I try to turn it on, and/or the notification LED shows a color on boot

Il y a un problème avec votre fichier boot.firm. Si vous utilisez boot9strap 1.4, votre LED de notification devrait clignoter d’une certaine couleur. Cette couleur est utilisée pour diagnostiquer des problèmes concernant votre fichier boot.firm sur la carte SD ou la mémoire interne. On older versions of boot9strap, the blue light will power off almost immediately when trying to turn on the console.

Si la LED de notification clignote :

  • White: Your 3DS was not able to find boot.firm on your SD card or on internal memory.
  • Magenta: Your 3DS was not able to find boot.firm on your SD card. Elle a pu trouver le fichier boot.firm sur la mémoire interne, mais le fichier est corrompu.
  • Red: Your 3DS was able to find boot.firm on both your SD card and on internal memory, but both files are corrupted.

Vous pouvez obtenir un nouveau fichier boot.firm en téléchargeant la dernière version de Luma3DS, extrayez l’archive et placez le fichier boot.firm à la racine de votre carte SD. Si votre fichier boot.firm est constamment détecté comme corrompu, vous devriez vérifier si votre carte SD est corrompue (Windows, Linux, ou macOS). Notez également que la 3DS a tendance à avoir des problèmes avec les fichiers extraits à l’aide de WinRAR.

If you hear a “popping sound”, potentially accompanied with the backlight turning on for a split second, there is a hardware issue with your console (such as a disconnected backlight cable). You may be able to get your console to boot by holding it at certain angles.

My console gets stuck on a black screen with blue power light staying on

Les étapes ci-dessous peuvent être tentées dans n’importe quel ordre, mais sont répertoriées de la moins longue à la plus longue.

  1. Power off your console, remove the SD card, re-insert it, then power on your console.
  2. Power off your console, eject the game cartridge if inserted, power on your console, then wait up to ten minutes. If your console boots within ten minutes, the issue has been fixed and is unlikely to reoccur
  3. Renommez le dossier Nintendo 3DS sur votre carte SD en Nintendo 3DS_BACKUP, puis essayez de démarrer. If your console successfully boots, there is some issue within your Nintendo 3DS folder. Essayez d’effacer les données “extdata” du Menu HOME :
    • Naviguez vers /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/
    • Supprimez le dossier correspondant à la région de votre 3DS :
      • Région EUR : 00000098
      • Région JPN : 00000082
      • Région USA : 0000008f
      • Région CHN : 000000A1
      • Région KOR : 000000A9
      • Région TWN : 000000B1
  4. Essayez de démarrer en mode de récupération et de mettre à jour votre console :
    • Power off your console
    • Maintenez (L) + (R) + (Haut sur la croix directionnelle) + (A)
    • Power on your console
    • If you were successful, the console will boot to an “update your system” screen
  5. Suivez le guide CTRTransfer
  6. Pour plus d’assistance, demandez de l’aide sur Nintendo Homebrew sur Discord

Message d’erreur au démarrage

"An error has occurred: Failed to apply 1 FIRM patch(es)" ou "An exception has occurred -- Current process: pm"

Votre version de Luma3DS est obsolète. Téléchargez la dernière version de Luma3DS et placez le fichier boot.firm à la racine de votre carte SD, en remplaçant tout fichier existant. Assurez-vous d’extraire le fichier ZIP avec un outil autre que WinRAR, car il est connu pour causer des problèmes avec les fichiers liés à 3DS.

"Unable to mount CTRNAND or load the CTRNAND FIRM. Please use an external one."

Plusieurs raisons peuvent expliquer pourquoi cela pourrait se produire. Dans tous les cas, cette erreur peut généralement être corrigée en suivant le guide CTRTransfer.

"Une erreur est survenue. Maintenez le bouton POWER enfoncé pour éteindre la console..."

Les gestionnaires d’exceptions ARM11 sont désactivés ou le custom firmware n’est pas installé. Essayez d’activer le gestionnaire d’exceptions ARM11 : + Power off your console + Maintenez (Select) appuyé + Power on your console, while still holding (Select) + Si la case “Disable ARM11 exception handlers” est cochée, décochez-la

Le Menu HOME ne contient pas les applications installées

Cela peut être causé par diverses raisons, mais probablement parce que votre carte SD n’est pas lue par la console. You can check if your SD is being read by holding SELECT on boot and checking the yellow text on the bottom screen; if it says “Booted from CTRNAND via B9S”, then your console is booting from the internal memory and not from the SD card. Si c’est le cas, essayez les étapes ci-dessous, qui sont listées du plus simple au plus difficile :

  1. Power off your console, remove the SD card, re-insert it, then power on your console
  2. Power off your console, remove the SD card, insert it on your computer, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
  3. Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux (this will wipe your SD card data)
  4. Testez votre carte SD en suivant le guide correspondant au système d’exploitation de votre ordinateur : Windows, Linux, macOS. Si votre carte SD est marquée comme défectueuse, vous devrez remplacer votre carte SD
  5. Il est possible que votre port carte SD soit cassé. Rejoignez Nintendo Homebrew sur Discord pour obtenir une aide approfondie
Écran bleu "BOOTROM ERROR"

Your console is likely hard-bricked. You will need to buy an ntrboot flashcart to reinstall boot9strap in order to attempt to fix your console. Cela peut également indiquer un problème matériel qui ne peut pas être résolu. Dans tous les cas, rejoignez Nintendo Homebrew sur Discord pour obtenir de l’aide. + Il est également possible que quelqu’un ait défini un écran de démarrage qui ressemble à un brick. Try leaving your console powered on, waiting on the blue screen, for five minutes.

Autres erreurs

Veuillez prendre une photo de l’erreur et rejoindre Nintendo Homebrew sur Discord pour obtenir de l’aide.

Software issues on consoles with custom firmware

La fonctionnalité DSi / DS est cassée ou a été remplacée par Flipnote Studio
  1. Téléchargez la dernière version de TWLFix-CFW (le fichier .3dsx)
  2. Éteignez votre console
  3. Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
  4. Copiez TWLFix-CFW.3dsx dans le dossier /3ds/ de votre carte SD
  5. Réinsérez votre carte SD dans votre console
  6. Ouvrez le Homebrew Launcher
  7. Lancez TWLFix-CFW que vous trouverez dans la liste des homebrews
  8. Appuyez sur (A) pour désinstaller les titres TWL corrompus
  9. Press (Start) to reboot the console
  10. Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
    • Le processus de mise à jour verra que les titres TWL essentiels ont été désinstallés, et va les re-télécharger et les réinstaller
  11. Once the update is complete, tap “OK” to reboot the console
La fonctionnalité Console Virtuelle GBA et/ou mode sans échec est cassée

Your console is running Luma3DS 6.6 or older, likely via arm9loaderhax. You should follow A9LH to B9S to update your console to a modern custom firmware environment.

Les jeux en mode mémoire étendue (Pokémon Soleil/Lune, Smash, etc.) ne fonctionnent pas

Cela peut se produire après un CTRTransfer ou un changement de région sur Old 3DS / 2DS. You will need to system format your console to fix this issue.

Message d'erreur lors du démarrage/chargement d'une application

Recherchez votre message d’erreur sur cette page. Si vous n’avez pas pu trouver votre message erreur ou si les instructions n’ont pas fonctionné, rejoignez Nintendo Homebrew sur Discord pour obtenir de l’aide.

Opening the HOME Menu settings crashes the console or loads the Homebrew Launcher

Your console likely still has menuhax67 installed. To uninstall menuhax67, download the latest release of menuhax67 (the menuhax .zip), then follow the “Uninstall menuhax67” section here.


Autres dépannages

Effacer les "extdata" du Menu HOME
  1. Éteignez votre console
  2. Insérez votre carte SD dans votre ordinateur
  3. Naviguez vers le dossier /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/ sur votre carte SD
  4. Supprimez le dossier correspondant à la région de votre 3DS :
    • Région EUR : 00000098
    • Région JPN : 00000082
    • Région USA : 0000008f
    • Région CHN : 000000A1
    • Région KOR : 000000A9
    • Région TWN : 000000B1
  5. Réinsérez votre carte SD dans votre console
Effacer les données de thème du Menu HOME
  1. Éteignez votre console
  2. Insérez votre carte SD dans votre ordinateur
  3. Naviguez vers le dossier /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/ sur votre carte SD
  4. Supprimez le dossier correspondant à la région de votre 3DS :
    • Région EUR : 000002ce
    • Région JPN : 000002cc
    • Région USA : 000002cd
  5. Réinsérez votre carte SD dans votre console
Manually entering Homebrew Launcher

If you are missing the Homebrew Launcher application from your HOME Menu, you can follow these instructions to manually enter the Homebrew Launcher. (You will need boot.3dsx and boot.firm on the root of your SD card.)

  1. Lancez l’application Mode téléchargement ()
  2. Attendez jusqu’à ce que vous voyiez les boutons Nintendo 3DS et Nintendo DS
  3. Appuyez simultanément sur (L) + (Bas sur la croix directionnelle) + (Select) pour ouvrir le menu Rosalina
  4. Sélectionnez “Miscellaneous options”
  5. Sélectionnez “Switch the hb. title to the current app.”
  6. Appuyez sur (B) pour continuer
  7. Appuyez sur (B) pour revenir au menu principal de Rosalina
  8. Appuyez sur (B) pour quitter le menu Rosalina
  9. Appuyez sur (HOME), pour mettre Mode téléchargement en suspens
  10. Appuyez sur le bouton “Quitter” sur l’écran du bas pour fermer Mode téléchargement
  11. Relancez l’application Mode téléchargement
  12. Your console should load the Homebrew Launcher
    • If your console is stuck on the loading splash screen, you are missing boot.3dsx from the root of your SD card
Désactivation du Contrôle parental

Vous pouvez désactiver la fonction Contrôle parental en allant dans Paramètres de la console -> Contrôle parental et en insérant le PIN, puis appuyez sur “Effacer les paramètres”, puis “Effacer” pour le désactiver. However, if you do not know the PIN and therefore cannot access the console’s settings, you will need to disable it. In order to do this, you need to obtain your console’s master key (mkey):

  1. Allez sur ce site web
  2. Remplissez les champs avec les informations suivantes :
    • Device Type: Select “3DS” (the same applies if you are using a 2DS, New 3DS (XL/LL) or New 2DS (XL/LL))
    • System date : Le jour et le mois de l’horloge sur laquelle votre console est réglée
    • Inquiry number : (Code d’assistance) Peut être obtenu en appuyant sur “Code PIN oublié” puis “J’ai oublié” dans l’écran du Contrôle parental
  3. Une fois que vous avez obtenu votre code général, appuyez sur OK sur l’écran sur lequel vous avez obtenu votre code d’assistance, puis saisissez le code général
  4. Appuyez sur “Effacer les paramètres”, puis “Effacer” pour supprimer toutes les données du Contrôle parental