安裝 boot9strap (透過 Soundhax)

若需英語支援，請於 Discord 上的 Nintendo Homebrew 伺服器發問。
如果您喜歡本教學，我們很樂意接受捐贈。
Technical Details (optional)

For technical details on the exploits that you will be using on this page, see here (Soundhax) and here (universal-otherapp).

相容性資訊

Soundhax (與 universal-otherapp 使用時) 可與韌體版本 1.0.0 至 11.3.0 的歐、日、韓、美版主機相容。

必備項目

  • The latest release of Soundhax (for your region, console, and version)
    • If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
  • The latest release of SafeB9SInstaller (direct download)
  • The latest release of boot9strap (direct download)
  • The latest release of Luma3DS (the Luma3DS .zip file)
  • The latest release of universal-otherapp (otherapp.bin)

操作說明

第一節 — 準備工作

In this section, you will copy the files needed to trigger both Soundhax and universal-otherapp.

  1. Power off your console
  2. 將 SD 卡插入至電腦中
  3. 複製 Soundhax .m4a 至 SD 卡的根目錄底下
    • 「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄，而非該資料夾內部
  4. 複製 otherapp.bin 至 SD 卡根目錄底下
  5. 解壓 Luma3DS .zip 內的 boot.firm 及 boot.3dsx 到 SD 卡的根目錄底下
  6. 在 SD 卡的根目錄底下建立一個新的資料夾 boot9strap
  7. 解壓 boot9strap .zip 的 boot9strap.firm 及 boot9strap.firm.sha 檔案至 SD 卡的 /boot9strap/ 資料夾中
  8. 將 SafeB9SInstaller .zip 中的 SafeB9SInstaller.bin 複製到 SD 卡的根目錄
  9. Reinsert your SD card into your console
  10. Power on your console

第二節 — 啟動 SafeB9SInstaller

In this section, you will launch Soundhax through the Nintendo 3DS Sound app, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.

  1. 啟動『任天堂 3DS 音樂(Nintendo 3DS Sound)』程式

  2. 如果您從未開啟過音樂撥放器或曾未聽過撥放器內鳥的提示，請一一略過鳥的提示，並關閉及重啟本程式
    • 在這情況下，如果直接啟動 Soundhax，這些提示每次都會跳出來；除非您先跳過提示，然後再正常重新啟動播放程式
  3. 選擇『/SDCARD』，並播放『<3 nedwill 2016』
    • This may take many (up to 10) tries
    • If you see the message “Could not play”, you are either on a system version incompatible with Soundhax or downloaded the wrong Soundhax release
    • 如果當機的話，透過電源按鈕將您的主機強制關機，並再試一次
    • If you get a different error, follow this troubleshooting guide

  4. 如果一切成功的話，您將自動進入 SafeB9SInstaller

第三節 — 安裝 boot9strap

In this section, you will install custom firmware onto your console.

  1. When prompted, input the key combo given on the top screen to install boot9strap
  2. Once it is complete, press (A) to reboot your console
  3. Your console should have booted into the Luma3DS configuration menu
    • Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
    • For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
    • If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
  4. 按『Start』鍵以存檔並重新啟動系統

At this point, your console will boot to Luma3DS by default.

  • Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  • On the next page, you will install useful homebrew applications to complete your setup.

繼續至完成安裝