安裝 boot9strap (透過 kartdlphax)
若需英語支援,請於 Discord 上的 Nintendo Homebrew 伺服器發問。
如果您喜歡本教學,我們很樂意接受捐贈。
必讀事項
kartdlphax 是瑪莉歐賽車 7 中下載通信模式中的一個漏洞。 它可以與 universal-otherapp 一起使用,在主機上安裝自製韌體。
如果你想通過此方法安裝自製韌體,則你需要:
- A second 3DS with custom firmware (the source 3DS) that is the same region as the 3DS you are trying to modify (the target 3DS)
- 一份與兩台主機同區的馬利歐賽車 7 (實體或數位版皆可)
- 兩張 SD 卡
必備項目
On the source 3DS (the 3DS with custom firmware):
- 最新版的 kartdlphax
- The latest release of Luma3DS 3GX Loader Edition
On the target 3DS (the 3DS that you are trying to modify):
- 最新版的 SafeB9SInstaller
- 最新版的 boot9strap
- 最新版的 一般 Luma3DS
第一步 – 準備工作(目標 3DS)
- Insert the SD card of your source 3DS in your computer
- Copy Luma 3GX Loader Edition’s
boot.firm
to the root of the source 3DS’s SD card, replacing any existing file- 「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄,而非該資料夾內部
- Copy kartdlphax’s
plugin.3gx
to the following directory on the source 3DS’s SD card, depending on the region of your copy of Mario Kart 7:- 美版:
luma/plugins/0004000000030800
- 歐版:
luma/plugins/0004000000030700
- 日版:
luma/plugins/0004000000030600
- Create the
plugins
and00040000...
folders if they do not already exist
- 美版:
- Eject the SD card and put it in the source 3DS
第二步 – 準備工作(目標 3DS)
- Insert the SD card of your target 3DS in your computer
- 解壓 Luma3DS
.zip
內的boot.firm
及boot.3dsx
到 SD 卡的根目錄底下 - 在 SD 卡的根目錄底下建立一個新的資料夾
boot9strap
- 解壓 boot9strap
.zip
的boot9strap.firm
及boot9strap.firm.sha
檔案至 SD 卡的/boot9strap/
資料夾中 - 將 SafeB9SInstaller
.zip
中的SafeB9SInstaller.bin
複製到 SD 卡的根目錄 - Eject the SD card and put it in the target 3DS
第三節 — kartdlphax
- Power on the source 3DS
- If you are prompted to set up Luma3DS, just press START to save the configuration
- Once in the HOME Menu, press (Left Shoulder) + (Down D-Pad) + (Select) to bring up the Rosalina menu
- 選擇『Enable plugin loader』
- 按『B』退出 Rosalina 選單
- 開啟瑪莉歐賽車 7
- 請確保您已經開啟了無線連接
- kartdlphax should tell you that it is running
- Navigate to
Local Multiplayer
->Create Group
- If the source 3DS freezes at this point and you are using a cartridge, try installing the cartridge to the system
- 將 3DS 目標機 開機
- 請確保您已經開啟了無線連接
- On the target 3DS, open the Download Play application (
), then select “Nintendo 3DS”
- Join the group created by the source 3DS
- Select “Start” on the source 3DS once it has detected the target 3DS
- Once multiplayer has loaded, navigate to
Grand Prix
->50cc
-> (any driver) ->Mushroom Cup
->OK
- Wait a while (a percentage should be displayed on the source 3DS)
- If the exploit was successful, the target 3DS will have booted into SafeB9SInstaller
第四節 — SafeB9SInstaller
- 出現提示時,輸入上方螢幕所顯示的按鍵組合以安裝 boot9strap
- 過程結束後,按下『A』重啟主機
第五節 — 設定 Luma3DS
- 您的 3DS 目標機將會重啟至 Luma3DS 設定選單中
- You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- 透過方向鍵及『A』以開啟下列選項:
- “Show NAND or user string in System Settings”
在這之後,您的主機會在插入 SD 卡的情況下自動啟動 Luma3DS。
- Luma3DS 不會特別在 HOME 主選單中新增任何特別的東西。 如果你的主機已經啟動到了 HOME 主選單,這代表自製韌體已經在運行了。
- 在下一頁中,我們將會教你複製 Luma3DS 到內存中,使得主機能在沒有 SD 卡的情況下啟動系統。
- You will not need to use your source 3DS to complete any further steps on this guide.