Installing boot9strap (USM)


Pentru suport în engleză, cereți ajutor la Nintendo Homebrew pe Discord.
If you appreciate this guide, we accept Donations.

Technical Details (optional)

In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.

We can do this using an existing exploit, BannerBomb3.

To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile into your connections list.

Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.

For a more technical explanation, see the following links for information on the BannerBomb3 and unSAFE_MODE exploits: BannerBomb3, unSAFE_MODE.

Compatibility Notes

Aceste instrucțiuni funcționează pe consolele din regiunea SUA, Europa, Japonia și Coreea, indicate de literele U, E, J, sau K după versiunea de sistem.

If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow an alternate branch of Seedminer. For assistance with this matter, join Nintendo Homebrew on Discord and ask, in English, for help.

Ce aveți nevoie

Secțiunea I - Preparații

In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device’s SD card.

  1. Your SD card should be inserted in your computer
  2. Copy usm.bin to the root of your SD card
  3. Copiați boot.firm și boot.3dsx de la Luma3DS .zip pe rădăcina cardului SD
    • The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
  4. Creați un folder numit boot9strap pe rădăcina cardului SD
  5. Copiați boot9strap.firm și boot9strap.firm.sha din arhiva .zip boot9strap în folderul /boot9strap/ de pe cardul SD
  6. Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card

Section II - BannerBomb3

In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.

  1. Reintroduceți cardul SD în dispozitivul dumneavoastră
  2. Porniți dispozitivul
  3. Porniți System Settings pe consolă
  4. Navigate to Data Management -> DSiWare-> SD Card (image)
  5. Use the D-Pad to navigate and press the (A) button to select “Install unSAFE_MODE”
    • Your device will automatically power off

Section III - unSAFE_MODE

In this section, you will enter Safe Mode (a feature available on all 3DS family devices) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.

  1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
    • Keep holding the buttons until the device boots into Safe Mode (a “system update” menu)
    • If you’re unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow an alternate branch of BannerBomb3. For assistance with this matter, join Nintendo Homebrew on Discord and ask, in English, for help.
  2. Press “OK” to accept the update
    • There is no update. This is part of the exploit
  3. Press “I accept” to accept the terms and conditions
  4. The update will eventually fail, with the error code 003-1099. This is intended behaviour
  5. When asked “Would you like to configure Internet settings?”, select “Yes”
  6. On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
  7. If the exploit was successful, your device will have booted into SafeB9SInstaller
    • If your device instead shows a red screen, you are missing usm.bin from the root of your SD card

Section IV - Installing boot9strap

In this section, you will install custom firmware onto your device.

  1. When prompted, input the key combo given on the top screen to install boot9strap
    • If the top screen is blank, power off your device and re-do Section III
  2. Once it is complete, press (A) to reboot your device
  3. Dispozitivul dumneavoastră ar trebui să fi repornit în meniul de configurare Luma3DS
    • If your device shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
  4. Apăsați (Start) pentru a salva și reporni

At this point, your console will boot to Luma3DS by default.

  • Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  • On the next page, you will install useful homebrew applications to complete your setup.

Section V - Restoring WiFi Configuration Profiles

In this section, you will trigger the BannerBomb3 exploit a second time so that you can restore the Wi-Fi connection slots that were overwritten in Section II.

  1. Porniți System Settings pe consolă
  2. Navigate to Data Management -> DSiWare-> SD Card (image)
  3. Use the D-Pad to navigate and press the (A) button to select “Uninstall unSAFE_MODE”
    • Your device will automatically reboot
  4. Închideți dispozitivul
  5. Introduceți cardul SD în calculator
  6. Navigați spre Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare pe cardul SD
  7. Delete F00D43D5.bin from your Nintendo DSiWare folder and from your computer. Acest fișier nu mai este necesar

Continuați la Finalizând instalarea