BannerBomb3 + Fredtool (TWN)

---

Pentru suport în engleză, cereți ajutor la Nintendo Homebrew pe Discord.

If you appreciate this guide, we accept Donations.

---

Lectură obligatorie

Pentru a descărca DSiWare de sistem, vom exploata o eroare din fereastra DSiWare Data Management de la aplicația Settings.

To accomplish this, we use your system’s encryption key (movable.sed) to build a DSiWare backup that exploits the system to dump the DSi Internet Settings application to the SD root.

Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.

These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, choose another method.

What you need

• Your movable.sed file completing Seedminer
• The latest release of Luma3DS (the Luma3DS .zip file)
• The latest release of b9stool (boot.nds)
• The latest release of Frogminer_save (Frogminer_save.zip)

Section I - CFW Check

1. Închideți dispozitivul
2. Hold the (Select) button
3. Power on your device while still holding the (Select) button
4. If the check was successful, you will boot to the HOME Menu and you may proceed with this guide

If you see a configuration menu, you already have CFW, and continuing with these instructions may BRICK your device! Follow Checking for CFW to upgrade your existing CFW.

Secțiunea II - Preparații

1. Închideți dispozitivul
2. Introduceți cardul SD în calculator
3. Copiați boot.firm și boot.3dsx de la Luma3DS .zip pe rădăcina cardului SD
   • The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
4. Copiați boot.nds (B9STool) în rădăcina cardului SD
5. Copiați folderul private de pe arhiva Frogminer_save .zip în rădăcina cardului SD
6. Keep your SD card in your computer - there are more things to do in the next section

Section III - BannerBomb3

1. Open the DSIHaxInjector V2 website on your computer
2. Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
3. Under the “MovableSed” field, upload your movable.sedusing the “Browse…” option
4. Click “Build”
5. Wait a few seconds, then click “Last build (#number) x sec ago”
6. Click the “output_(name).zip” link
7. Navigați spre Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare pe cardul SD
   • <ID0> is the same as the one you used in Seedminer
   • <ID1> is a 32-character folder inside of <ID0>
   • If the Nintendo DSiWare folder does not exist, then create it
8. If there is anything currently in the Nintendo DSiWare folder, move it elsewhere for safekeeping
9. Open the output_(name) .zip file and navigate to China_Taiwan -> output_setup
10. Copy all six .bin files to the Nintendo DSiWare folder
11. Reintroduceți cardul SD în dispozitivul dumneavoastră
12. Porniți dispozitivul
13. Porniți System Settings pe consolă
14. Navigate to Data Management -> DSiWare -> SD Card -> (page 2)
15. Take note of what number is on the DSiWare title on the second page (it will be a number between 1 and 6)
16. Închideți dispozitivul
17. Introduceți cardul SD în calculator
18. Navigați spre Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare pe cardul SD
19. Open the output_(name) .zip file and navigate to China_Taiwan -> output_hax
20. Copy the .bin file that is the same number as the one that was on the second page of the DSiWare Management menu to the Nintendo DSiWare folder, and overwrite when prompted
21. Porniți dispozitivul
22. Porniți System Settings pe consolă
23. Navigate to Data Management -> DSiWare -> SD Card
24. Wait a while
    • The following should happen, in this order: A progress swirl, a short freeze, the bottom screen turning purple, the music stopping, then the device showing an error message and rebooting
    • If you did not see the purple screen, then something went wrong
25. You should now have the file 42383821.bin on the root of your SD card
26. Navigați spre Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare pe cardul SD
27. Delete all of the .bin files in the Nintendo DSiWare folder

Section IV - Fredtool

1. Open the DSIHaxInjector_new website on your computer
2. Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
   • You might want to put in a different name to differentiate it from BannerBomb3’s output
3. Under the “DSiBin” field, upload your 42383821.bin file using the first “Browse…” option
4. Under the “MovableSed” field, upload your movable.sed file using the second “Browse…” option
5. Under the “InjectionTarget” field, set the injection target to DSdownloadplay(NOT memorypit)
6. Click “Build”
7. Wait a few seconds, then click “Last build (#number) x sec ago”
8. Click the “output_(name).zip” link
9. Navigați spre Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare pe cardul SD
10. Copy the 484E4441.bin file from the hax folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder
11. Reintroduceți cardul SD în dispozitivul dumneavoastră
12. Porniți dispozitivul
13. Porniți System Settings pe consolă
14. Navigați spre Data Management -> DSiWare
15. Under the “SD Card” section, select the “Haxxxxxxxxx!” title
16. Select “Copy”, then select “OK”
17. Exit System Settings
18. Launch Download Play on your device (the orange icon with a 3DS on it)
19. Selectaţi “Nintendo DS”
20. If the exploit was successful, your 3DS will have loaded into the JPN version of Flipnote Studio

Section V - Flipnote Exploit

Dacă preferați un ghid vizual pentru aceasta secțiune, deja este disponibil unul aici.

1. Finalizați procesul de configurare iniţială pentru jocul lansat până când ajungeți la meniul principal
   • Selectaţi opţiunea stângă ori de câte ori se solicită în timpul procesului de instalare
2. Folosind ecranul tactil, selectaţi căsuța mare din stânga, apoi selectaţi căsuța cu o pictogramă de card SD
3. Odată ce se încarcă meniul, selectaţi iconița cu o față apoi iconița din dreapta jos pentru a continua
4. Apăsați (X) sau (Sus) pe D-Pad în funcție de care este afișat pe ecranul superior
5. Alegeți al doilea buton de sus cu o iconiță de rolă de film
6. Derulați dreapta până când este selectat rola “3/3”
7. Atingeţi căsuța a treia cu litera “A” în ea
8. Derulați stânga până când este selectat rola “1/3”
9. Atingeţi căsuța a patra cu litera “A” în ea
10. În cazul în care exploit-ul a mers, dispozitivul va încărca b9sTool
11. Using the D-Pad, move to “Install boot9strap”
    • If you miss this step, the system will exit to home menu instead of installing boot9strap and you will need to open DS Download Play and start over from the beginning of this section
12. Apăsați (A), apoi apăsați START și SELECT în același timp pentru a începe procedeul
13. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
    • Este posibil să aveţi nevoie să forțați oprirea dispozitivului apăsând butonul de pornire
    • If your device shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
    • If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide

Section VI - Luma3DS Verification

1. Închideți dispozitivul
2. Introduceți cardul SD în calculator
3. Verify that a luma folder exists and that config.ini is inside of it
   • The existence of these folders and files confirms that Luma3DS is installed
   • If you do not see the luma folder or config.ini, follow this troubleshooting guide

At this point, your console will boot to Luma3DS by default.

• Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
• On the next page, you will install useful homebrew applications to complete your setup.

Section VII - Restoring DS Download Play

1. Navigați spre Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare pe cardul SD
2. Copy the 484E4441.bin file from the clean folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder
3. Reintroduceți cardul SD în dispozitivul dumneavoastră
4. Porniți dispozitivul
5. Porniți System Settings pe consolă
6. Navigați spre Data Management -> DSiWare
7. Under the “SD Card” section, select the “Haxxxxxxxxx!” title
8. Select “Copy”, then select “OK”
9. Exit System Settings
10. Închideți dispozitivul

---

Continuați la Finalizând instalarea