Installing boot9strap (HBL-USM)


英語によるサポートについては、 Nintendo Homebrew on Discord のヘルプをご覧ください。
If you appreciate this guide, we accept Donations.

Technical Details (optional)

In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.

As we already have Homebrew access, we can use slotTool to do this.

Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.

For a more technical explanation, see here for information about the unSAFE_MODE exploit.

Compatibility Notes

If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join Nintendo Homebrew on Discord and ask, in English, for help.

必要なもの

  • The latest release of SafeB9SInstaller (direct download)
  • The latest release of boot9strap (direct download)
  • The latest release of unSAFE_MODE
    • You may already have this from a prior section of the guide

セクション I - 準備

In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device’s SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.

  1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
    • If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
  2. Launch slotTool from the list of homebrew
    • If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
  3. Select the “INSTALL exploit to wifi slots 1,2,3 & shutdown” option
    • You will see some on-screen text and then your system will shut down
  4. Remove your SD card from your console and connect it to your computer
  5. boot9strapという名前のフォルダをSDカードのルート上に作成します。
  6. boot9strap.firmboot9strap.firm.shaを boot9strap .zip ファイルから解凍し、SD カードのboot9strapフォルダにコピーします。
  7. SafeB9SInstaller .zip からSafeB9SInstaller.binをSDカードのルートへコピーします
  8. Copy usm.bin from the unSAFE_MODE .zip to the root of your SD card
  9. Put your SD card back into your console

Section II - unSAFE_MODE

In this section, you will enter Safe Mode (a feature available on all 3DS family devices) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.

  1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
    • Keep holding the buttons until the device boots into Safe Mode (a “system update” menu)
    • If you’re unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join Nintendo Homebrew on Discord and ask, in English, for help.
  2. 「OK」を押して更新を承認します
    • アップデートはありません。 そういう仕組みになっています
  3. 「承諾」を押して利用規約に同意します
  4. The update will eventually fail, with the error code 003-1099. これもそうなるように仕込まれています
  5. 「インターネット設定を設定しますか?」と聞かれたら、「はい」を選択します。
  6. On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
  7. If the exploit was successful, your device will have booted into SafeB9SInstaller

セクション III - boot9strapをインストールする

In this section, you will install custom firmware onto your device.

  1. When prompted, input the key combo given on the top screen to install boot9strap
    • If the top screen is blank, power off your device and re-do Section III
  2. Once it is complete, press (A) to reboot your device
  3. デバイスはLuma3DS設定メニューに再起動します
    • Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
    • For the purpose of this guide, these settings will be left on default settings
    • If your device shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
  4. (Start) を押してセーブして再起動します

At this point, your console will boot to Luma3DS by default.

  • Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  • On the next page, you will install useful homebrew applications to complete your setup.

Section IV - Restoring WiFi Configuration Profiles

In this section, you will enter the Homebrew Launcher (this time using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.

  1. 再度ダウンロードプレイアプリを開きます。
  2. 画面が表示されるまで待ちます
    • Do not press either of the buttons
  3. (Lボタン) + (十字キー下) + (Select) を同時に押してRosalina menu を開きます
  4. “Miscellaneous options​”を選びます。
  5. “Switch the hb. title to the current app.”を選びます。
  6. (B) ボタンで続行します
  7. (B) を押してRosalinaメインメニューに戻ります
  8. (B) を押してRosalinaメインメニューを終了します。
  9. Homeボタンを押しダウンロードプレイを閉じます。
  10. Relaunch the Download Play application
  11. デバイスでHomebrew Launcherが起動されます
  12. Launch slotTool from the list of homebrew
  13. Select “RESTORE original wifi slots 1,2,3”
  14. Your device will then reboot

セットアップを完了する へ進みます