BannerBomb3 + Fredtool (TWN)
必読事項
DSiWareシステムをダンプするために、本体設定アプリのDSiWare データ管理画面の脆弱性を使用します。
To accomplish this, we use your system’s encryption key (movable.sed) to build a DSiWare backup that exploits the system to dump the DSi Internet Settings application to the SD root.
Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, choose the other method.
What you need
- Your
movable.sed
file completing Seedminer - The latest release of Luma3DS (the Luma3DS
.zip
file) - The latest release of b9stool (
boot.nds
) - The latest release of Frogminer_save (
Frogminer_save.zip
)
Section I - CFW Check
- 本体の電源を切ります。
- Hold the (Select) button
- Power on your device while still holding the (Select) button
- If the check was successful, you will boot to the HOME Menu and you may proceed with this guide
If you see a configuration menu, you already have CFW, and continuing with these instructions may BRICK your device! Follow Checking for CFW to upgrade your existing CFW.
####セクションⅡ-準備
- 本体の電源を切ります。
- パソコンにSDカードを入れます
boot.firm
とboot.3dsx
をLuma3DSの.zip
からSDカードのルートにコピーします- SDカードのルートとは、Nintendo 3DSのフォルダなどがある最初の項目のことであり、フォルダの中ではありません。
- SDカードのルートに
boot.nds
(B9STool) をコピーします - Frogminer_save
.zip
からprivate
フォルダをSDカードのルートにコピーします - Keep your SD card in your computer - there are more things to do in the next section
Section III - BannerBomb3
- Open the DSIHaxInjector V2 website on your computer
- Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
- Under the “MovableSed” field, upload your
movable.sed
using the “Browse…” option - Click “Build”
- Wait a few seconds for the build process to complete
- In the Build History section on the left, type the Username into the “Filter Builds” field
- Click on the first search result
- This result should have the latest timestamp
- Click the “output_(name).zip” link
- Navigate to
Nintendo 3DS
-><ID0>
-><ID1>
on your SD card- ここでいう
<ID0>
は先ほど Seedminer で使用したものと同じです。 <ID1>
は<ID0>
の中の32文字の長いフォルダのことです。
- ここでいう
- Create a folder named
Nintendo DSiWare
inside of the<ID1>
- If you already had the folder and there are any existing DSiWare backup files (
<8-character-id>.bin
) inside, copy them to your PC and remove them from your SD card
- If you already had the folder and there are any existing DSiWare backup files (
- Open the output_(name)
.zip
file and navigate toChina_Taiwan
->output_setup
- Copy all six
.bin
files to theNintendo DSiWare
folder - 再度、SDカードを本体に挿入してください。
- デバイスの電源を入れます
- 「本体設定」を開きます。
- Navigate to
Data Management
->DSiWare
->SD Card
-> (page 2) - Take note of what number is on the DSiWare title on the second page (it will be a number between 1 and 6)
- 本体の電源を切ります。
- パソコンにSDカードを入れます
- SDカードの
Nintendo 3DS
-><ID0>
-><ID1>
->Nintendo DSiWare
へ移動します - Open the output_(name)
.zip
file and navigate toChina_Taiwan
->output_hax
- Copy the
.bin
file that is the same number as the one that was on the second page of the DSiWare Management menu to theNintendo DSiWare
folder, and overwrite when prompted - デバイスの電源を入れます
- 「本体設定」を開きます。
- Navigate to
Data Management
->DSiWare
->SD Card
- Wait a while
- The following should happen, in this order: A progress swirl, a short freeze, the bottom screen turning purple, the music stopping, then the device showing an error message and rebooting
- If you did not see the purple screen, then something went wrong
- You should now have the file
42383821.bin
on the root of your SD card - SDカードの
Nintendo 3DS
-><ID0>
-><ID1>
->Nintendo DSiWare
へ移動します - Delete all of the
.bin
files in theNintendo DSiWare
folder
Section IV - Fredtool
- Open the DSIHaxInjector_new website on your computer
- Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
- You might want to put in a different name to differentiate it from BannerBomb3’s output
- Under the “DSiBin” field, upload your
42383821.bin
file using the first “Browse…” option - Under the “MovableSed” field, upload your
movable.sed
file using the second “Browse…” option - Under the “InjectionTarget” field, set the injection target to
DSdownloadplay
(NOT memorypit) - Click “Build”
- Wait a few seconds for the build process to complete
- In the Build History section on the left, type the Username into the “Filter Builds” field
- Click on the first search result
- This result should have the latest timestamp
- Click the “output_(name).zip” link
- SDカードの
Nintendo 3DS
-><ID0>
-><ID1>
->Nintendo DSiWare
へ移動します - Copy the
484E4441.bin
file from thehax
folder of the downloaded DSiWare archive (output_(name).zip) to theNintendo DSiWare
folder - 再度、SDカードを本体に挿入してください。
- デバイスの電源を入れます
- 「本体設定」を開きます。
データ管理
->DSiWare データ管理
の順に移ります。- Under the “SD Card” section, select the “Haxxxxxxxxx!” title
- Select “Copy”, then select “OK”
- Exit System Settings
- Launch Download Play on your device (the orange icon with a 3DS on it)
- 「ニンテンドーDS」を選択
- If the exploit was successful, your 3DS will have loaded into the JPN version of Flipnote Studio
Section V - Flipnote Exploit
このセクションのビジュアルガイドをご希望の場合は、 このリンク からご利用いただけます。
- メインメニューに到達するまで、うごくメモ帳の初期設定プロセスを完了します
- セットアッププロセス中にプロンプトが表示されるたびに左のオプションを選択します
- タッチスクリーンを使用して、大きな左のボックスを選択し、SDカードアイコンのあるボックスを選択します
- メニューが読み込まれたら、顔アイコンを選択し、右下アイコンをクリックして続行します
- 上部画面に表示されている(X) ボタンまたは(UP) 矢印を押します
- フィルムリールアイコン付きの上部にある2番目のボタンを選択します
- 「3/3」リールが選択されるまで右にスクロール
- 「A」という文字が入った3番目のボックスをタップしてください
- “1/3” リールが選択されるまで左にスクロール
- 「A」の文字が入った4番目のボックスをタップしてください
- エクスプロイトが成功した場合、お使いのデバイスは b9sTool をロードします。
- Using the D-Pad, move to “Install boot9strap”
- If you miss this step, the system will exit to home menu instead of installing boot9strap and you will need to open DS Download Play and start over from the beginning of this section
- (A) を押し、同時にSTARTとSELECTを押してプロセスを開始します
- Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
- 電源ボタンを長押しして強制的に電源を切る必要があるかもしれません
- If your device shuts down when you try to power it on, ensure that you have copied
boot.firm
from the Luma3DS.zip
to the root of your SD card + If you see the Luma Configuration screen, power off your device and continue to the next section
Section VI - Luma3DS Configuration
- Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
- Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
- For the purpose of this guide, these settings will be left on default settings
- If you boot to HOME Menu, follow this troubleshooting guide
- (Start) を押してセーブして再起動します
Section VII - Restoring DS Download Play
- SDカードの
Nintendo 3DS
-><ID0>
-><ID1>
->Nintendo DSiWare
へ移動します - Copy the
484E4441.bin
file from theclean
folder of the downloaded DSiWare archive (output_(name).zip) to theNintendo DSiWare
folder - 再度、SDカードを本体に挿入してください。
- デバイスの電源を入れます
- 「本体設定」を開きます。
データ管理
->DSiWare データ管理
の順に移ります。- Under the “SD Card” section, select the “Haxxxxxxxxx!” title
- Select “Copy”, then select “OK”
- Exit System Settings
- 本体の電源を切ります。
セットアップを完了する へ進みます