BannerBomb3 + Fredtool (TWN)


Para soporte en inglés, pide ayuda en el Discord de Nintendo Homebrew.
Si te gustó esta guía, aceptamos Donaciones.

Lectura requerida

Para volcar una aplicación DSiWare del sistema, aprovecharemos un fallo en la ventana de Gestión de datos DSiWare de la aplicación Configuración.

To accomplish this, we use your system’s encryption key (movable.sed) to build a DSiWare backup that exploits the system to dump the DSi Internet Settings application to the SD root.

Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.

These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, choose another method.

What you need

  • Your movable.sed file completing Seedminer
  • The latest release of Luma3DS (the Luma3DS .zip file)
  • The latest release of b9stool (boot.nds)
  • The latest release of Frogminer_save (Frogminer_save.zip)

Sección I - Verificación de CFW

  1. Apaga tu consola
  2. Mantén pulsado el botón (Select)
  3. Enciende la consola mientras mantienes presionado (Select)
  4. If the check was successful, you will boot to the HOME Menu and you may proceed with this guide

If you see a configuration menu, you already have CFW, and continuing with these instructions may BRICK your device! Sigue la sección de Comprobación de CFW para actualizar tu CFW existente.

Sección II - Preparativos

  1. Apaga tu consola
  2. Inserta tu tarjeta SD en tu computadora
  3. Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
    • La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
  4. Copia boot.nds (B9STool) a la raíz de tu tarjeta SD
  5. Copia la carpeta private contenida en el .zip de Frogminer_save a la raíz de tu tarjeta SD
  6. Keep your SD card in your computer - there are more things to do in the next section

Section III - BannerBomb3

  1. Open the DSIHaxInjector V2 website on your computer
  2. Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
  3. Under the “MovableSed” field, upload your movable.sedusing the “Browse…” option
  4. Click “Build”
    • Wait a few seconds for the build process to complete
  5. In the Build History section on the left, type the Username into the “Filter Builds” field
  6. Click on the first search result
    • This result should have the latest timestamp
  7. Click the “output_(name).zip” link
  8. Navigate to Nintendo 3DS -> <ID0> -> <ID1> on your SD card
    • La <ID0> en cuestión es la misma que usaste en Seedminer
    • El <ID1> es una carpeta con un nombre compuesto por 32 caracteres, dentro de <ID0>
  9. Create a folder named Nintendo DSiWare inside of the <ID1>
    • If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your PC and remove them from your SD card
  10. Open the output_(name) .zip file and navigate to China_Taiwan -> output_setup
  11. Copy all six .bin files to the Nintendo DSiWare folder
  12. Vuelve a insertar tu tarjeta SD en tu consola
  13. Enciende tu consola
  14. Entra a Configuración de la consola
  15. Navigate to Data Management -> DSiWare -> SD Card -> (page 2)
  16. Take note of what number is on the DSiWare title on the second page (it will be a number between 1 and 6)
  17. Apaga tu consola
  18. Inserta tu tarjeta SD en tu computadora
  19. Ve a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare en tu tarjeta SD
  20. Open the output_(name) .zip file and navigate to China_Taiwan -> output_hax
  21. Copy the .bin file that is the same number as the one that was on the second page of the DSiWare Management menu to the Nintendo DSiWare folder, and overwrite when prompted
  22. Enciende tu consola
  23. Entra a Configuración de la consola
  24. Navigate to Data Management -> DSiWare -> SD Card
  25. Wait a while
    • The following should happen, in this order: A progress swirl, a short freeze, the bottom screen turning purple, the music stopping, then the device showing an error message and rebooting
    • If you did not see the purple screen, then something went wrong
  26. You should now have the file 42383821.bin on the root of your SD card
  27. Ve a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare en tu tarjeta SD
  28. Delete all of the .bin files in the Nintendo DSiWare folder

Section IV - Fredtool

  1. Open the DSIHaxInjector_new website on your computer
  2. Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
    • You might want to put in a different name to differentiate it from BannerBomb3’s output
  3. Under the “DSiBin” field, upload your 42383821.bin file using the first “Browse…” option
  4. Under the “MovableSed” field, upload your movable.sed file using the second “Browse…” option
  5. Under the “InjectionTarget” field, set the injection target to DSdownloadplay(NOT memorypit)
  6. Click “Build”
    • Wait a few seconds for the build process to complete
  7. In the Build History section on the left, type the Username into the “Filter Builds” field
  8. Click on the first search result
    • This result should have the latest timestamp
  9. Click the “output_(name).zip” link
  10. Ve a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare en tu tarjeta SD
  11. Copy the 484E4441.bin file from the hax folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder
  12. Vuelve a insertar tu tarjeta SD en tu consola
  13. Enciende tu consola
  14. Entra a Configuración de la consola
  15. Ve a Data Management -> DSiWare
  16. Under the “SD Card” section, select the “Haxxxxxxxxx!” title
  17. Select “Copy”, then select “OK”
  18. Exit System Settings
  19. Launch Download Play on your device (the orange icon with a 3DS on it)
  20. Selecciona “Nintendo DS”
  21. If the exploit was successful, your 3DS will have loaded into the JPN version of Flipnote Studio

Section V - Flipnote Exploit

Si prefieres una guía visual para esta parte, hay una disponible aquí.

  1. Completa la configuración del juego hasta que llegues al menú principal
    • Selecciona la opción de la izquierda cuando te lo pida durante la configuración inicial
  2. Utilizando la pantalla táctil, selecciona el cuadrado grande de la izquierda, luego selecciona el cuadrado con el ícono de una tarjeta SD
  3. Una vez que cargue el menú, selecciona el ícono con una cara, luego el ícono abajo a la derecha de la pantalla para continuar
  4. Presiona (X) o (Arriba) en el D-Pad dependiendo de cuál se muestre en la pantalla superior
  5. Elige el segundo botón de los que están en la parte de arriba, con un ícono de rollo de película
  6. Ve hacia la derecha hasta seleccionar el carrete “3/3”
  7. Toca el tercer cuadrado con una letra “A” en él
  8. Ve hacia la izquierda hasta el carrete “1/3”
  9. Toca el cuarto cuadrado con una letra “A” en él
  10. Si el exploit fue exitoso, tu consola habrá cargado b9sTool
  11. Using the D-Pad, move to “Install boot9strap”
    • If you miss this step, the system will exit to home menu instead of installing boot9strap and you will need to open DS Download Play and start over from the beginning of this section
  12. Presiona (A), luego presiona START y SELECT al mismo tiempo para iniciar el proceso
  13. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
    • Puede que tengas que forzar el apagado manteniendo pulsado el botón de encendido
    • If your device shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
    • If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide

Section VI - Luma3DS Verification

  1. Apaga tu consola
  2. Inserta tu tarjeta SD en tu computadora
  3. Verify that a luma folder exists and that config.ini is inside of it

At this point, your console will boot to Luma3DS by default.

  • Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  • On the next page, you will install useful homebrew applications to complete your setup.

Section VII - Restoring DS Download Play

  1. Ve a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare en tu tarjeta SD
  2. Copy the 484E4441.bin file from the clean folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder
  3. Vuelve a insertar tu tarjeta SD en tu consola
  4. Enciende tu consola
  5. Entra a Configuración de la consola
  6. Ve a Data Management -> DSiWare
  7. Under the “SD Card” section, select the “Haxxxxxxxxx!” title
  8. Select “Copy”, then select “OK”
  9. Exit System Settings
  10. Apaga tu consola

Continúa en Finalizar instalación