Επίλυση προβλημάτων (Μετά την εγκατάσταση)
This page offers troubleshooting advice for commonly encountered issues after custom firmware is installed. Εάν δεν μπορείτε να διορθώσετε το ζήτημά σας με τις συμβουλές αυτής της σελίδας, γίνετε μέλος του Nintendo Homebrew στο Discord και περιγράψτε το πρόβλημά σας, καθώς και όλες τις λύσεις που έχετε ήδη δοκιμάσει.
Ζητήματα εκκίνησης
INFO
The steps detailed here generally assume that your console has a modern custom firmware setup (boot9strap + Luma3DS 8.0 or greater). If your console is running an older homebrew setup (for example, something based on arm9loaderhax or menuhax), you should update your setup before trying these instructions.
Φωτεινές ενδείξεις τροφοδοσίας/ειδοποιήσεων
Η κονσόλα μου απενεργοποιείται όταν προσπαθώ να την ενεργοποιήσω ή/και το LED ειδοποιήσεων εμφανίζει ένα χρώμα κατά την εκκίνηση
Υπάρχει κάποιο πρόβλημα με το αρχείο boot.firm σας. If you're running boot9strap 1.4, your 3DS notification LED may flash a certain color. This color is used to diagnose issues involving your boot.firm file on SD card or internal memory. On older versions of boot9strap, the blue light will power off almost immediately when trying to turn on the console.
If the notification LED flashes:
- White: Your 3DS was not able to find
boot.firmon your SD card or on internal memory. - Magenta: Your 3DS was not able to find
boot.firmon your SD card. It was able to findboot.firmon internal memory, but the file is corrupted. - Red: Your 3DS was able to find
boot.firmon both your SD card and on internal memory, but both files are corrupted.
You can get a new boot.firm file by downloading the latest release of Luma3DS, extracting it, and placing boot.firm on the root of your SD card. If your boot.firm file is consistently being detected as corrupted, you may want to check your SD card for errors (Windows, Linux, or macOS). Also, note that the 3DS tends to have issues with files extracted using WinRAR.
If you hear a "popping sound", potentially accompanied with the backlight turning on for a split second, there is a hardware issue with your console (such as a disconnected backlight cable). You may be able to get your console to boot by holding it at certain angles.
My console gets stuck on a black screen with blue power light staying on
The steps below can be attempted in any order, but are listed from least to most time-consuming.
- Power off your console, remove the SD card, re-insert it, then power on your console.
- Power off your console, eject the game cartridge if inserted, power on your console, then wait up to ten minutes. If your console boots within ten minutes, the issue has been fixed and is unlikely to reoccur
- Rename the
Nintendo 3DSfolder on your SD card toNintendo 3DS_BACKUP, then attempt to boot. If your console successfully boots, there is some issue within yourNintendo 3DSfolder. Try clearing HOME Menu extdata:- Navigate to
/Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/ - Delete the corresponding folder for your 3DS region:
- EUR Region:
00000098 - JPN Region:
00000082 - USA Region:
0000008f - CHN Region:
000000A1 - KOR Region:
000000A9 - TWN Region:
000000B1
- EUR Region:
- Navigate to
- Try booting into recovery mode and updating your system:
- Απενεργοποιήστε την κονσόλα σας
- Hold (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A)
- Ενεργοποιήστε την κονσόλα σας
- If you were successful, the console will boot to an "update your system" screen
- Follow the CTRTransfer guide
- For further support, ask for help at Nintendo Homebrew on Discord
Error message on boot
"An error has occurred: Failed to apply 1 FIRM patch(es)" or "An exception has occurred -- Current process: pm"
Your Luma3DS version is outdated. Download the latest release of Luma3DS and place boot.firm on the root of your SD card, replacing any existing file. Make sure you are extracting the ZIP file with any tool other than WinRAR, as it is known to cause issues with 3DS-related files.
"Unable to mount CTRNAND or load the CTRNAND FIRM. Please use an external one."
There are a number of reasons as to why this could be happening. In any case, this error can usually be fixed by following the CTRTransfer guide.
«An error has occurred. Hold down the POWER button to turn off the power...»
ARM11 exception handlers are disabled, or custom firmware is not installed. Try enabling ARM11 exception handlers:
- Απενεργοποιήστε την κονσόλα σας
- Hold (Select)
- Power on your console, while still holding (Select)
- If the "Disable ARM11 exception handlers" box is checked, uncheck it
HOME Menu is missing installed applications
This could be caused by various reasons, but most likely because your SD card is not being read by the system. You can check if your SD is being read by holding SELECT on boot and checking the yellow text on the bottom screen; if it says "Booted from CTRNAND via B9S", then your console is booting from the internal memory and not from the SD card. If this is the case, attempt the steps below, which are listed from easiest to hardest:
- Power off your console, remove the SD card, re-insert it, then power on your console
- Power off your console, remove the SD card, insert it on your computer, download the latest release of Luma3DS, extract
boot.firmfrom theLuma3DS.zipand place it on the root of your SD card (replacing any existing file) - Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer's operating system: Windows, macOS, Linux (this will wipe your SD card data)
- Test your SD card for errors by following the guide according to your computer's operating system: Windows, Linux, macOS. If your SD card is marked as faulty, then you will have to replace your SD card
- Your SD card slot may be broken. Join Nintendo Homebrew on Discord for further assistance
Blue "BOOTROM ERROR" screen
Your console is likely hard-bricked. You will need to buy an ntrboot flashcart to reinstall boot9strap in order to attempt to fix your console. This may also indicate a hardware issue that cannot be fixed. In any case, join Nintendo Homebrew on Discord for assistance.
- It is also possible that someone has set a boot-time splash screen that just looks like a brick. Try leaving your console powered on, waiting on the blue screen, for five minutes.
Some other error
Please take a photo of the error and join Nintendo Homebrew on Discord for assistance.
Software issues on consoles with custom firmware
DSi / DS functionality is broken or has been replaced with Flipnote Studio
- Download the latest release of TWLFix-CFW (the
.3dsxfile) - Απενεργοποιήστε την κονσόλα σας
- Δημιουργήστε έναν φάκελο με το όνομα
3dsστη ρίζα της κάρτας SD σας αν δεν υπάρχει ήδη - Copy
TWLFix-CFW.3dsxto the/3ds/folder on your SD card - Εισαγάγετε ξανά την κάρτα SD στην κονσόλα σας
- Open the Homebrew Launcher
- Launch TWLFix-CFW from the list of homebrew
- Press (A) to uninstall the broken TWL titles
- Press (Start) to reboot the console
- Ενημερώστε την κονσόλα σας ανοίγοντας την εφαρμογή «System Settings», επιλέγοντας «Other Settings» και τέλος, «System Update» στην τελευταία σελίδα προς τα δεξιά
- The update will see that the essential TWL titles have been uninstalled, and will redownload and reinstall them
- Once the update is complete, tap "OK" to reboot the console
GBA Virtual Console and/or Safe Mode functionality is broken
Your console is running Luma3DS 6.6 or older, likely via arm9loaderhax. You should follow A9LH to B9S to update your console to a modern custom firmware environment.
Extended memory mode games (Pokemon Sun/Moon, Smash, etc.) don't work
This can occur after a CTRTransfer or region change on Old 3DS / 2DS. Follow the instructions here to fix this issue (skipping steps 3, 4, 5, and 6).
Exception screen when booting/loading an application
Look for your exception screen in this page. If you weren't able to find your error or the instructions didn't work, join Nintendo Homebrew on Discord for further assistance.
Opening the HOME Menu settings crashes the console or loads the Homebrew Launcher
Your console likely still has menuhax67 installed. To uninstall menuhax67, download the latest release of menuhax67 (the menuhax .zip), then follow the "Uninstall menuhax67" section here.
Something else
Join Nintendo Homebrew on Discord for assistance, and describe the issue that you see.
Other troubleshooting
Clear HOME Menu extdata
- Απενεργοποιήστε την κονσόλα σας
- Εισαγάγετε την κάρτα SD στον υπολογιστή σας
- Navigate to the
/Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/folder on your SD card - Delete the corresponding folder for your 3DS region:
- EUR Region:
00000098 - JPN Region:
00000082 - USA Region:
0000008f - CHN Region:
000000A1 - KOR Region:
000000A9 - TWN Region:
000000B1
- EUR Region:
- Εισαγάγετε ξανά την κάρτα SD στην κονσόλα σας
Clear HOME Menu theme data
- Απενεργοποιήστε την κονσόλα σας
- Εισαγάγετε την κάρτα SD στον υπολογιστή σας
- Navigate to the
/Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/folder on your SD card - Delete the corresponding folder for your 3DS region:
- Περιοχή EUR:
000002ce - Περιοχή JPN:
000002cc - Περιοχή USA:
000002cd - Περιοχή KOR:
000002cf
- Περιοχή EUR:
- Εισαγάγετε ξανά την κάρτα SD στην κονσόλα σας
Manually entering Homebrew Launcher
If you are missing the Homebrew Launcher application from your HOME Menu, you can follow these instructions to manually enter the Homebrew Launcher. (You will need boot.3dsx and boot.firm on the root of your SD card.)
- Εκκινήστε την εφαρμογή «Download Play» (
) - Περιμένετε μέχρι να δείτε τα κουμπιά
Nintendo 3DSκαιNintendo DS - Πατήστε τα (L) + (Κάτω) + (Select) ταυτόχρονα ώστε να εκκινήσετε το μενού Rosalina
- Επιλέξτε «Miscellaneous options»
- Επιλέξτε «Switch the hb. title to the current app.»
- Πατήστε το (Β) για να συνεχίσετε
- Πατήστε το (B) για να επιστρέψετε στο κύριο μενού Rosalina
- Πατήστε το (B) για να κλείσετε το μενού Rosalina
- Πατήστε το (Home) για να αναστείλετε τη λειτουργία του Download Play
- Πατήστε το κουμπί «Close» στο κάτω μέρος της οθόνης για να κλείσετε το Download Play
- Εκκινήστε ξανά την εφαρμογή «Download Play»
- Η κονσόλα σας θα φορτώσει το Homebrew Launcher
- Εάν η κονσόλα σας έχει κολλήσει στην οθόνη φόρτωσης, τότε απουσιάζει το
boot.3dsxαπό τη ρίζα της κάρτας SD σας
- Εάν η κονσόλα σας έχει κολλήσει στην οθόνη φόρτωσης, τότε απουσιάζει το
Απενεργοποίηση του γονικού ελέγχου (Parental Controls)
You can disable the Parental Controls feature by going to System Settings -> Parental Controls and inserting the PIN, then pressing "Clear Settings", then "Delete" to remove it. However, if you do not know the PIN and therefore cannot access the console's settings, you will need to disable it. In order to do this, you need to obtain your console's master key (mkey):
- Μεταβείτε σε αυτόν τον ιστότοπο
- Συμπληρώστε τα ακόλουθα πεδία:
- Device Type: Select "3DS" (the same applies if you are using a 2DS, New 3DS (XL/LL) or New 2DS (XL/LL))
- System Date: The day and month your console's clock is set to
- Inquiry Number: Can be obtained by pressing "Forgot PIN" then "I Forgot" in the Parental Controls screen
- After you have obtained your mkey, press OK on the screen you have obtained your Inquiry Number, then input the master key
- Press "Clear Settings", then "Delete" to remove all Parental Controls data
TIP
Επιστροφή στην Επίλυση προβλημάτων