Installing boot9strap (kartdlphax)
Für Support auf Englisch, bitte um Hilfe auf dem Nintendo Homebrew Discord.
If you appreciate this guide, we accept Donations.
Required Reading
kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices.
In order to follow these instructions, you will need the following:
- A second 3DS with custom firmware (the source 3DS) that is the same region as the 3DS you are trying to modify (the target 3DS)
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
Was du brauchst
On the source 3DS (the 3DS with custom firmware):
- The latest release of kartdlphax (
plugin.3gx
) - The latest release of Luma3DS 3GX Loader Edition (
boot.firm
)
On the target 3DS (the 3DS that you are trying to modify):
- The latest release of SafeB9SInstaller (direct download)
- The latest release of boot9strap (direct download)
- The latest release of standard Luma3DS (the Luma3DS
.zip
file)
Section I - Prep Work (source 3DS)
- Insert the SD card of your source 3DS in your computer
- Copy Luma 3GX Loader Edition’s
boot.firm
to the root of the source 3DS’s SD card, replacing any existing file- The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
- Copy kartdlphax’s
plugin.3gx
to the following directory on the source 3DS’s SD card, depending on the region of your copy of Mario Kart 7:- USA:
luma/plugins/0004000000030800
- EUR:
luma/plugins/0004000000030700
- JPN:
luma/plugins/0004000000030600
- Create the
plugins
and00040000...
folders if they do not already exist
- USA:
- Eject the SD card and put it in the source 3DS
Section II - Prep Work (target 3DS)
- Insert the SD card of your target 3DS in your computer
- Copy
boot.firm
andboot.3dsx
from the standard Luma3DS.zip
to the root of your SD card - Erstelle einen Ordner namens
boot9strap
im Stammverzeichnis deiner SD-Karte - Kopiere
boot9strap.firm
undboot9strap.firm.sha
aus der boot9strap.zip
in den/boot9strap/
-Ordner auf deiner SD-Karte - Copy
SafeB9SInstaller.bin
from the SafeB9SInstaller.zip
to the root of your SD card - Eject the SD card and put it in the target 3DS
Section III - kartdlphax
- Power on the source 3DS
- If you are prompted to set up Luma3DS, just press START to save the configuration
- Once in the HOME Menu, press (Left Shoulder) + (Down D-Pad) + (Select) to bring up the Rosalina menu
- Select “Enable plugin loader”
- Drücke (B), um das Rosalina-Menü zu schließen
- Launch Mario Kart 7
- Ensure that wireless connectivity is enabled
- kartdlphax should tell you that it is running
- Navigate to
Local Multiplayer
->Create Group
- If the source 3DS freezes at this point and you are using a cartridge, try installing the cartridge to the system
- Power on the target 3DS
- Ensure that wireless connectivity is enabled
- On the target 3DS, open the Download Play application (
), then select “Nintendo 3DS”
- Join the group created by the source 3DS
- Select “Start” on the source 3DS once it has detected the target 3DS
- Once multiplayer has loaded, navigate to
Grand Prix
->50cc
-> (any driver) ->Mushroom Cup
->OK
- Wait a while (a percentage should be displayed on the source 3DS)
- If the exploit was successful, the target 3DS will have booted into SafeB9SInstaller
Section IV - Installing boot9strap
- When prompted, input the key combo given on the top screen to install boot9strap
- Once it is complete, press (A) to reboot your device
- Your target 3DS should have rebooted into the Luma3DS configuration menu
- If your target 3DS shuts down when you try to power it on, ensure that you have copied
boot.firm
from the Luma3DS.zip
to the root of your SD card
- If your target 3DS shuts down when you try to power it on, ensure that you have copied
- Drücke (Start) zum Speichern und neustarten
At this point, your console will boot to Luma3DS by default.
- Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- On the next page, you will install useful homebrew applications to complete your setup.
- You will not need to use your source 3DS to complete any further steps on this guide.